310-879 Exam

Quality and Value for the 310-879 Exam

Test4pass Practice Exams for SUN 310-879 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your 310-879 Exam

If you prepare for the exam using our Test4pass testing engine, we guarantee your success in the first attempt. If you do not pass the SUN Other Certifications 310-879 exam (ProCurve Secure WAN) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

SUN 310-879 Downloadable, Printable Exams (in PDF format)

Our Exam 310-879 Preparation Material provides you everything you will need to take your 310-879 Exam. The 310-879 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.

310-879 Downloadable, Interactive Testing engines

We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our SUN 310-879 Exam will provide you with free 310-879 dumps questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the 310-879 Exam:100% Guarantee to Pass Your SUN Other Certifications exam and get your SUN Other Certifications Certification.

Hot KeyWords On 310-879 test

We collect some hot keywords about this exam:
Test4pass , Pass 4 Sure , Test in Side ,Pass Guide ,Test King 310-879 exam | 310-879 pdf exam | 310-879 braindumps | 310-879 study guides | 310-879 trainning materials | 310-879 simulations | 310-879 testing engine | 310-879 vce | 310-879 torrent | 310-879 dumps | free download 310-879 | 310-879 practice exam | 310-879 preparation files | 310-879 questions | 310-879 answers.

How to pass your 310-879 exam

You can search on Search Engine and Find Best IT Certification site: Test4pass.com - Find the Method to succeed 310-879 test,The safer.easier way to get SUN Other Certifications Certification .

��
��
Exam : SUN 310-879
Title : Sun Certified Partner Field Engineer, level 3


1. On a Sun Fire E2900 server, you modified the LOM network to 'static' from 'dhcp' using the setupnetwork command. After answering all the questions, the LOM configuration came back to the lom> prompt. You type shownetwork and notice the network setting is still 'dhcp' instead of 'static'. Which is most likely the problem?
A. 'Static' is an invalid option.
B. Your LOM revision level is too low.
C. LOM setup aborted before you finished.
D. You need to use the resetsc command after making the change.
Answer: D

2. A customer's system has been running slowly, and the /opt/SUNWsrspx/bin/srsproxy process has been identified as the problem. Its process ID is 186. What command should you use to terminate this process?
A. killall
B. proc kill 186
C. pkill srsproxy
D. pskill srsproxy
Answer: C

3. A customer has installed a new disk drive in the upper left slot of their Sun Fire V240 (disk 2). They are unable to see the disk from the operating system. How can you make the disk visible to Solaris?
A. Use boot -r to reconfigure the system.
B. Run format at the operating system level.
C. Reseat the drive and reboot after power down.
D. Perform a boot -av to see if the system recognises the disk.
Answer: A

4. A customer has forgotten the ALOM password for a user on a Sun Fire V210 system. The system is up and running. How can you reset a forgotten ALOM from the OS?
A. # password
B. # userpassword [username]
C. # scadm userpassword [username]
D. ALOM passwords cannot be reset from the OS.
Answer: C

5. You have been asked to brief the customer regarding the power configuration of a Sun Fire 6800 for compliance with Sun Fire Midframe Server Configuration Best Practices.
The Sun Fire 6800 power configuration is as follows:
1. 2 redundant transfer units (RTU)
2. Each RTU contains 2 redundant transfer switches (RTS)
Which three should you tell the customer about best practices for power configuration? (Choose three.)
A. If one RTS fails, the RTU will shutdown.
B. Both RTS in an RTU should be connected to the same power source.
C. Both RTS in each RTU do not load share and are in active-standby mode.
D. Both RTS in each RTU perform load sharing and are in active-active mode.
E. The Sun Fire rack has 2 RTUs that should be connected to a single power source.
F. The Sun Fire rack has 2 RTUs that each should be connected to a separate power source.
G. The RTS will attempt to switch incoming power to a second RTS module in the RTU in the event of a brownout or power failure.
Answer: CFG

6. You have replaced a failed RTS on a Sun Fire 6800. While packing your tools you hear a loud mechanical lunk. On investigation, you discover the righthand RTS has failed over to the lefthand RTS.
What should you do?
A. Replace the other RTS unit as these normally always fail in pairs.
B. Suspect a version mismatch between the original and your replacement RTS.
C. Nothing, the machine will always use the functioning left-hand RTS when available.
D. Ask the customer to connect to the System Controller and enable the replacement RTS.
Answer: C

7. Several previously working Sunblade 150 and associated peripheral cabinets have been moved to another part of the building. Upon powerup, one system is now exhibiting this error message:
Resetting SCSI bus data overrun - got too much data from target (4,0)
WARNING Target 4 reducing synch transfer rate
SCSI bus reset
What is the most likely cause of this problem?
A. Faulty cable connector
B. Faulty network cable at 4,0
C. Mirrored root disk needs resynching
D. Fiber optic cable not seated correctly
E. Wrong peripheral cabinet has been reconnected
Answer: A

8. A customer has had a number of I/O problems with the primary controller on a Sun StorEdge 3510 with two controllers. Back end support requests that you remove the primary RAID Controller to isolate the problem. How can you identify which of the controllers is the primary?
A. The SFP link status LED is off.
B. The SFP link status LED is green.
C. The I/O controller module LED is solid green.
D. The I/O controller module LED is blinking green.
Answer: D

9. You are doing the initial platform setup on a Sun StorEdge T3+ array. The customer wants to create a LUN with a Blocksize = 64k. What command serves to define the blocksize parameter of the array?
A. set
B. sys
C. fru
D. vol
Answer: B

10. After replacing the root-disk on a Sun Fire V490, the device path needs to be updated with the new disk WWN: w21000011c63f0c94. It is necessary to update the nvramrcdevalias entries to the new device path so the system will be able to boot from the replaced root-disk.
From the OS, how should you update the nvram alias for root-disk?
A. ok>setenv boot-device root-disk
B. ok>nvalias root-disk /[email protected],600000/SUNW,[email protected]/[email protected],0/[email protected],0:a
C. ok> devalias root-disk /[email protected],600000/SUNW,[email protected]/[email protected],0/[email protected],0:a
D. #eeprom devalias root-disk /[email protected],600000/SUNW,[email protected]/[email protected],0/[email protected],0:a
E. #eeprom nvramrc='devalias root-disk
/[email protected],600000/SUNW,[email protected]/[email protected],0/[email protected],0:a'
Answer: E

11. You have completed an EIS installation. The customer asks for a copy of the EIS CD-ROM in case they need to rebuild the same system at a later date. What should you do?
A. Advise the customer to order an official copy.
B. Give the customer the discs as part of the installation.
C. Refuse politely, the discs are not available to customers.
D. Offer to make copy of the discs which you will pass on later.
Answer: C

12. A customer reports that over the last few months there have been multiple occasions when power supply 0 (PS0) on their Sun Fire V440 has recorded errors in the var/adm/messages file. Due to the multiple errors, PTS has determined that the device should be replaced. All LED indicators on the system are normal.
What command, if any, at the ALOM prompt should you run to prepare the power supply for replacement?
A. sc> offline ps0
B. sc> poweroff ps0
C. sc> removefru ps0
D. No command is necessary because the power supplies are redundant.
Answer: C

13. A customer firewall is blocking ssh logon access to a newly installed desktop server.
What port(s) need to be opened on the firewall to allow ssh traffic on the default port(s)?
A. 22
B. 443
C. 20 and 21
D. 22 and 23
Answer: A

14. You are installing a StorEdge T3b Array and have already entered the T3 module name. According to the EIS checklist, you are required to enter the blocksize. What is the block size required by EIS?
A. 4k
B. 16k
C. 32k
D. 64k
Answer: C