310-880 Exam

Quality and Value for the 310-880 Exam

Test4pass Practice Exams for SUN 310-880 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.

100% Guarantee to Pass Your 310-880 Exam

If you prepare for the exam using our Test4pass testing engine, we guarantee your success in the first attempt. If you do not pass the SUN Other Certifications 310-880 exam (ProCurve Secure WAN) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.

SUN 310-880 Downloadable, Printable Exams (in PDF format)

Our Exam 310-880 Preparation Material provides you everything you will need to take your 310-880 Exam. The 310-880 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.

310-880 Downloadable, Interactive Testing engines

We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our SUN 310-880 Exam will provide you with free 310-880 dumps questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the 310-880 Exam:100% Guarantee to Pass Your SUN Other Certifications exam and get your SUN Other Certifications Certification.

Hot KeyWords On 310-880 test

We collect some hot keywords about this exam:
Test4pass , Pass 4 Sure , Test in Side ,Pass Guide ,Test King 310-880 exam | 310-880 pdf exam | 310-880 braindumps | 310-880 study guides | 310-880 trainning materials | 310-880 simulations | 310-880 testing engine | 310-880 vce | 310-880 torrent | 310-880 dumps | free download 310-880 | 310-880 practice exam | 310-880 preparation files | 310-880 questions | 310-880 answers.

How to pass your 310-880 exam

You can search on Search Engine and Find Best IT Certification site: Test4pass.com - Find the Method to succeed 310-880 test,The safer.easier way to get SUN Other Certifications Certification .

��
��
Exam : SUN 310-880
Title : SUN Certified Senior System Support Engineer


1. A customer is connected to a remote machine and needs to know some information about the CPUs installed. Which two Solaris commands can be used to determine the number of CPUs installed, and the speed of each? (Choose two.)
A. psradm
B. cpustat
C. devfsadm
D. psrinfo -v
E. prtdiag -v
Answer: DE

2. You are installing a 66 Mhz PCI card in a Sun Fire 6800. The customer tells you they want the best performance from the card. (Note, the customer has no PCI+ I/O Boards installed in the system)
How many slots in an 8-slot PCI I/O Board can operate at 66 Mhz?
A. 0
B. 1
C. 2
D. 3
E. 4
Answer: C

3. You begin to boot a Sun Fire V1280 server, but realize some additional settings need to be checked. You decide to stop the boot and bring the system to the OK prompt. How can you accomplish this during the boot process?
A. Type ~..
B. Type break.
C. Go to the lom > prompt and type break.
D. Go to the lom > prompt and type reset -x.
Answer: C

4. You are installing a Sun Fire E2900 on a customer site and the customer wants to configure the POST level on the System Controller to run at the maximum level. What command from the LOM prompt should you run to configure the SC POST level?
A. setupsc
B. setuplom
C. setupnetwork
D. setupplatform
Answer: A

5. You are installing a used StorEdge 3310 SCSI array on a Sun Fire V480 server. You want to determine if the disks have updated firmware. Which command should you use to evaluate the firmware level?
A. fru stat
B. iostat -En
C. iostat -tcx
D. prtconf -pv
E. luxadm -e probe | grep version
F. luxadm display -v /dev/rdsk/cXtXdX
Answer: B

6. You install a system to customer specifications and after rebooting you get the following message:
NIS server not responding for ... retrying
The customer tells you that there is a network problem which prevents this machine from reaching the NIS server. You boot the machine into single user mode.
What action should you take to allow the system to operate until the NIS server is reachable again?
A. Edit /etc/nsswitch.conf so that file is first for all entries and reboot into multiuser mode.
B. Copy /etc/nsswitch.files to /etc/nsswitch.conf and reboot into multiuser mode.
C. Edit /etc/resolv.conf so that the domain entry is commented out and reboot into multiuser mode.
D. Rename /etc/rc2.d/S72inetsvc to /etc/rc2.d/DisabledS72inetsvc and reboot into multiuser mode.
Answer: B

7. You are conducting a pre-install site survey for 8 Sun Fire V890s and 4 Sun Rack 900s in a raised floor environment. The customer wants to install them in 2 rows, one in front of the other.
How should you configure the placement of the systems?
A. The Sun Fire V890s should be placed back to back, and perforated floor tiles should be placed in front of the racks.
B. The Sun Fire V890s should be placed back to back, and perforated floor tiles should be placed at the rear of the racks.
C. The Sun Fire V890s should be facing the same direction, one behind the other, and perforated floor tiles should be placed in front of the racks.
D. The Sun Fire V890s should be facing the same direction, one behind the other, and perforated floor tiles should be placed both in front of, and at the rear of the racks.
Answer: A

8. A customer wants a new PCI Ethernet card installed in a Sun Fire E2900. After physically installing the card, you want to verify that the system recognizes the card before the OS is booted. Which two OBP commands can you use to accomplish this? (Choose two.)
A. devalias
B. show-devs
C. show-nets
D. .inet-addr
E. probe-net-all
F. probe-scsi-all
Answer: BC

9. You are installing a Sun Fire 15K server. The System Controller comes with a pre-installed, EIS compliant Solaris image. You need to confirm that this image was installed with the current EIS CD.
Which file can be used to determine the current version of the EIS CD used on a system?
A. /etc/motd
B. /etc/release
C. /sun/install.log
D. $SMSETC/SMS/config/smsversion.cf
Answer: C

10. You are updating Jumpstart config files with the following parameters supplied by the customer:
system_locale=C
timezone=US/Eastern
timeserver=129.148.94.5
network_interface=primary {netmask=255.255.255.0 protocol_ipv6=no}
terminal=dtterm s
ecurity_policy=NONE
name_service=NONE
Which file should you update with the customer required parameters?
A. /etc/bootparams
B. /Jumpstart/rules
C. /Jumpstart/class
D. /Jumpstart/sysidcfg
Answer: D

11. You are checking a Sun Fire V880 system configuration for dual-loop fibre disk operation. What command will show the existence of dual-loop?
A. prtfru -v
B. prtconf -pv
C. prtdiag -v
D. luxadm display enclosure
E. luxadm -e disp_port_map path_to_disk
Answer: D

12. You have performed a setkeyswitch on for domain A on a Sun Fire 6800 where the auto-boot? OBP variable is set to false. What command at the OBP should you run to find the status of the POST?
A. showlog-results
B. showlog results
C. show-log-results
D. showpost-results
E. showpost results
F. show-post-results
Answer: F

13. After creating a Jumpstart server, you try to boot the client using the command boot net - install, but receive the following messages:
ok boot net - install
Boot device: /[email protected],700000/[email protected] File and args: - install
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Which five could cause this problem? (Choose five.)
A. Alias "net" not correctly set
B. Client not running watch-net-all
C. in.rarpd not running on boot server
D. Network cable not correctly connected
E. A duplicate hostname in /etc/hosts
F. Failed to issue a reconfigure boot command
G. MAC address entry missing in /etc/ethers
Answer: ACDEG

14. A customer requires additional swap space on their system. As the customer does not want to repartition their disks, a decision to use a swap file is made. Which entry should you use in the /etc/vfstab file so that the new swap file is activated automatically when the system is booted?
A. /path/filename - - swap - no -
B. /path/filename - - tmpfs - no -
C. /path/filename - - swap - yes -
D. /path/filename - - tmpfs - yes -
Answer: A