70-642 Exam
TS: Windows Server 2008 Network Infrastructure, Configuring
- Exam Number/Code : 70-642
- Exam Name : TS: Windows Server 2008 Network Infrastructure, Configuring
- Questions and Answers : 370 Q&As
- Update Time: 2014-11-11
-
Price:
$ 129.00$ 49.00 -
70-642 Hard Copy (PDF)
-
70-642 Test Engine
Free 70-642 Demo Download
Test4pass offers free demo for TS 70-642 exam (TS: Windows Server 2008 Network Infrastructure, Configuring). You can check out the interface, question quality and usability of our practice exams before you decide to buy it. We are the only one site can offer demo for almost all products.
Exam Description
It is well known that 70-642 exam test is the hot exam of Microsoft certification. Test4pass offer you all the Q&A of the 70-642 real test . It is the examination of the perfect combination and it will help you pass 70-642 exam at the first time!
Why choose Test4pass 70-642 braindumps
Quality and Value for the 70-642 Exam
100% Guarantee to Pass Your 70-642 Exam
Downloadable, Interactive 70-642 Testing engines
Verified Answers Researched by Industry Experts
Drag and Drop questions as experienced in the Actual Exams
Practice Test Questions accompanied by exhibits
Our Practice Test Questions are backed by our 100% MONEY BACK GUARANTEE.
Test4pass 70-642 Exam Features
Quality and Value for the 70-642 Exam
Test4pass Practice Exams for Microsoft 70-642 are written to the highest standards of technical accuracy, using only certified subject matter experts and published authors for development.
100% Guarantee to Pass Your 70-642 Exam
If you prepare for the exam using our Test4pass testing engine, we guarantee your success in the first attempt. If you do not pass the TS 70-642 exam (ProCurve Secure WAN) on your first attempt we will give you a FULL REFUND of your purchasing fee AND send you another same value product for free.
Microsoft 70-642 Downloadable, Printable Exams (in PDF format)
Our Exam 70-642 Preparation Material provides you everything you will need to take your 70-642 Exam. The 70-642 Exam details are researched and produced by Professional Certification Experts who are constantly using industry experience to produce precise, and logical. You may get questions from different web sites or books, but logic is the key. Our Product will help you not only pass in the first try, but also save your valuable time.
70-642 Downloadable, Interactive Testing engines
We are all well aware that a major problem in the IT industry is that there is a lack of quality study materials. Our Exam Preparation Material provides you everything you will need to take a certification examination. Like actual certification exams, our Practice Tests are in multiple-choice (MCQs) Our Microsoft 70-642 Exam will provide you with free 70-642 dumps questions with verified answers that reflect the actual exam. These questions and answers provide you with the experience of taking the actual test. High quality and Value for the 70-642 Exam:100% Guarantee to Pass Your TS exam and get your TS Certification.
Hot KeyWords On 70-642 test
We collect some hot keywords about this exam:
Test4pass , Pass 4 Sure , Test in Side ,Pass Guide ,Test King 70-642 exam | 70-642 pdf exam | 70-642 braindumps | 70-642 study guides | 70-642 trainning materials | 70-642 simulations | 70-642 testing engine | 70-642 vce | 70-642 torrent | 70-642 dumps | free download 70-642 | 70-642 practice exam | 70-642 preparation files | 70-642 questions | 70-642 answers.
How to pass your 70-642 exam
You can search on Search Engine and Find Best IT Certification site: Test4pass.com - Find the Method to succeed 70-642 test,The safer.easier way to get TS Certification .
Microsoft 70-642 Exam Offical Information
1. Your network contains 100 servers that run Windows Server 2008 R2.
A server named Server1 is deployed on the network. Server1 will be used to collect events from the
Security event logs of the other servers on the network.
You need to define the Custom Event Delivery Optimization settings on Server1.
Which tool should you use?
A. Event Viewer
B. Task Scheduler
C. Wecutil
D. Wevtutil
Answer: C
2. Your network contains a server that runs Windows Server 2008 R2. You plan to create a custom script.
You need to ensure that each time the script runs, an entry is added to the Application event log.
Which tool should you use?
A. Eventcreate
B. Eventvwr
C. Wecutil
D. Wevtutil
Answer: A
3. Your network contains a server that has the SNMP Service installed.
You need to configure the SNMP security settings on the server.
Which tool should you use?
A. Local Security Policy
B. Scw
C. Secedit
D. Services console
Answer: D
4. Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the SNMP
Service installed.
You perform an SNMP query against Server1 and discover that the query returns the incorrect identification
information.
You need to change the identification information returned by Server1.
What should you do?
A. From the properties of the SNMP Service, modify the Agent settings.
B. From the properties of the SNMP Service, modify the General settings.
C. From the properties of the SNMP Trap Service, modify the Logon settings.
D. From the properties of the SNMP Trap Service, modify the General settings.
Answer: A
5. You need to capture the HTTP traffic to and from a server every day between 09:00 and 10:00.
What should you do?
A. Create a scheduled task that runs the Netsh tool.
B. Create a scheduled task that runs the Nmcap tool.
C. From Network Monitor, configure the General options.
D. From Network Monitor, configure the Capture options.
Answer: B
6. Your network contains a single Active Directory domain. All servers run Windows Server 2008 R2. A DHCP
server is deployed on the network and configured to provide IPv6 prefixes. You need to ensure that when
you monitor network traffic, you see the interface identifiers derived from the Extended Unique Identifier
(EUI)-64 address.
Which command should you run?
A. netsh.exe interface ipv6 set global addressmaskreply=disabled
B. netsh.exe interface ipv6 set global dhcpmediasense=enabled
C. netsh.exe interface ipv6 set global randomizeidentifiers=disabled
D. netsh.exe interface ipv6 set privacy state=enabled
Answer: C
7. Your network contains a server named Server1 that runs Windows Server 2008 R2. Server1 has the
Routing and Remote Access service (RRAS) role service installed.
You need to view all inbound VPN packets. The solution must minimize the amount of data collected.
What should you do?
A. From RRAS, create an inbound packet filter.
B. From Network Monitor, create a capture filter.
C. From the Registry Editor, configure file tracing for RRAS.
D. At the command prompt, run netsh.exe ras set tracing rasauth enabled.
Answer: B
8. Your company has an IPv6 network that has 25 segments. You deploy a server on the IPv6 network.
You need to ensure that the server can communicate with all segments on the IPv6 network.
What should you do?
A. Configure the IPv6 address as fd00::2b0:d0ff:fee9:4143/8.
B. Configure the IPv6 address as fe80::2b0:d0ff:fee9:4143/64.
C. Configure the IPv6 address as ff80::2b0:d0ff:fee9:4143/64.
D. Configure the IPv6 address as 0000::2b0:d0ff:fee9:4143/64.
Answer: A
9. Your company is designing its network. The network will use an IPv6 prefix of 2001:DB8:BBCC:0000::/53.
You need to identify an IPv6 addressing scheme that will support 2000 subnets.
Which network mask should you use?
A. /61
B. /62
C. /63
D. /64
Answer: D
10. Your company uses DHCP to lease IPv4 addresses to computers at the main office. A WAN link connects
the main office to a branch office. All computers in the branch office are configured with static IP addresses.
The branch office does not use DHCP and uses a different subnet.
You need to ensure that the portable computers can connect to network resources at the main office and
the branch office.
How should you configure each portable computer?
A. Use a static IPv4 address in the range used at the branch office.
B. Use an alternate configuration that contains a static IP address in the range used at the main office.
C. Use the address that was assigned by the DHCP server as a static IP address.
D. Use an alternate configuration that contains a static IP address in the range used at the branch office.
Answer: D
11. Your company has computers in multiple locations that use IPv4 and IPv6. Each location is protected by a
firewall that performs symmetric NAT.
You need to allow peer-to-peer communication between all locations.
What should you do?
A. Configure dynamic NAT on the firewall.
B. Configure the firewall to allow the use of Teredo.
C. Configure a link local IPv6 address for the internal interface of the firewall.
D. Configure a global IPv6 address for the external interface of the firewall.
Answer: B
12. You have a Windows Server 2008 R2 computer that has an IP address of 172.16.45.9/21. The server is
configured to use IPv6 addressing.
You need to test IPv6 communication to a server that has an IP address of 172.16.40.18/21.
What should you do from a command prompt?
A. Type ping 172.16.45.9:::::.
B. Type ping ::9.45.16.172.
C. Type ping followed by the Link-local address of the server.
D. Type ping followed by the Site-local address of the server.
Answer: C
13. Your network contains a DHCP server named DHCP1 that runs Windows Server 2008 R2. All client
computers on the network obtain their network configurations from DHCP1.
You have a client computer named Client1 that runs Windows 7 Enterprise. You need to configure Client1
to use a different DNS server than the other client computers on the network.
What should you do?
A. Configure the scope options.
B. Create a reservation.
C. Create a DHCP filter.
D. Define a user class.
Answer: B
14. Your network contains a domain controller named DC1 and a member server named Server1.
You save a copy of the Active Directory Web Services (ADWS) event log on DC1. You copy the log to
Server1.
You open the event log file on Server1 and discover that the event description information is unavailable.
You need to ensure that the event log file displays the same information when the file is open on Server1
and on DC1.
What should you do on Server1?
A. Import a custom view.
B. Copy the SYSVOL folder from DC1.
C. Copy the LocaleMetaData folder from DC1.
D. Create a custom view.
Answer: C
Feedbacks
still valided,passed
deicise - 2013-08-03 13:07:58